DrySyn Vortex Temperature Controlled System
The DrySyn Vortex Temperature Controlled System is ideal for chemists screening viscous materials, or those that can be damaged by the grinding effect of stirrer bars, at precise temperatures ranging from ambient to 150 °C. Use with DrySyn SnowStorm MULTI inserts also allows use down to a minimum temperature of -30 °C.
A mechanical gearbox enables more powerful stirring to be achieved using the reduction drive. This is ideal for mixing highly viscous solutions or using lower power overhead stirrers. The DrySyn Vortex Temperature Controlled System enables up to three round bottom flasks of up to 500 mL size to be stirred simultaneously with one overhead stirrer.
NEW: Additional options available with kits to suit 250 mL round bottom flasks with B24 / B29 fittings.
The use of a circulator allows active cooling or heating to maintain constant solution temperatures and facilitates controlled ramping to reduce overshoot. This is key in the polymer industry, where solution temperature is important for solution handling and polymerisation, or those handling exothermic/endothermic reactions.
- Hose barb size: 9.5 mm OD
- Temperature range: Ambient to 150 °C (Note that these temperatures are dependent upon the circulator connected)
- Optional DrySyn SnowStorm MULTI inserts enable a minimum temperature of -30 °C
- Perform multiple reactions with one overhead stirrer, whilst maintaining a compact footprint
- Accommodates up to 3 x round bottom flasks up to 500 mL
- Compatible with DrySyn MULTI 100 mL, 250 mL & 500 mL inserts, and DrySyn SnowStorm MULTI 100 mL and 250 mL inserts.
- Speed range: 50 – 500 rpm
| ADS11-TC | DrySyn Vortex Temperature Controlled Kit: including DrySyn Vortex temperature controlled system with support stand and clamping mechanism, 3 x stirrer shafts (6 mm shaft diameter), 3 x stirrer guides (B24 cone joint) and 3 x 500 mL DrySyn MULTI-S inserts. |
| ADS11-TC/B29 | DrySyn Vortex Temperature Controlled Kit: including DrySyn Vortex temperature controlled system with support stand and clamping mechanism, 3 x stirrer shafts (6 mm shaft diameter), 3 x stirrer guides (B29 cone joint) and 3 x 500 mL DrySyn MULTI-S inserts. |
| ADS11-TC-250 | DrySyn Vortex Temperature Controlled Kit: including DrySyn Vortex temperature controlled system with support stand and clamping mechanism, 3 x stirrer shafts (6 mm shaft diameter), 3 x stirrer guides (B24 cone joint) and 3 x 250 mL DrySyn MULTI-S inserts. |
| ADS11-TC-250/B29 | DrySyn Vortex Temperature Controlled Kit: including DrySyn Vortex temperature controlled system with support stand and clamping mechanism, 3 x stirrer shafts (6 mm shaft diameter), 3 x stirrer guides (B29 cone joint) and 3 x 250 mL DrySyn MULTI-S inserts. |
| ADS11-V-TC | DrySyn Vortex Temperature Control Only: with support stand and clamping mechanism (not including PTFE stirrer shafts and guides or DrySyn flask inserts). |
| ADS11-S | DrySyn Vortex Stirrers & Guides: 6mm shaft, B24 cone, pack of 3 each. |
| ADS11-S/B29 | DrySyn Vortex Stirrers & Guides: 6mm shaft, B29 cone, pack of 3 each. |
UK / Europe / Global Delivery
Developed in collaboration with our clients / Bespoke design service
Committed to developing sustainable & practical improvements for scientists worldwide
Martyn Fordham, MD
