Asynt has produced a new report with Julabo that compares the thermal performance and advantages of vacuum jacketed versus non-vacuum jacketed reaction vessels.

Data is presented for vacuum jacketed and non-vacuum jacketed reaction vessels connected to a Julabo Presto A30 temperature control system. The report demonstrates that a vacuum jacketed vessel not only achieved faster rates of cooling but was also able to maintain a reaction at -20°C compared to just -15°C for the non-vacuum jacketed vessel. Beneficially, also using a vacuum jacketed vessel was shown to eliminate ice formation on the outside of the reactor glass (a common problem with non-vacuum jacketed reaction vessels), allowing continuous viewing of the reactor contents.

By reducing heat loss / gain a glass vacuum jacket enables faster rates of heating and uses less energy to cool the system, thereby enabling lower temperatures to be achieved than reactor vessels without a vacuum jacket. The report concludes that using a vacuum jacketed reaction vessel will allow you to optimise thermal performance thereby improving control of reactions. In addition, the report proposes that the small additional cost of a vacuum jacketed vessel is easily justified not only by the additional performance but also by the cost saving of being able to use a lower powered temperature control system.

Vacuum jacketed reaction vessels are available as options for the Asynt ReactoMate Pilot (5-50 litres) and for the Asynt ReactoMate Datum (100ml – 5 litres) reactor systems.

For a copy of the report and further information on vacuum jacketed reactor systems or contact us on [email protected] .

You can download the full press release HERE.